Jim Ruocco started off the meeting with three impressive natural edge bowls. And with all of our Show and Tells, the great work didn’t sop there. We saw HOW work, segmented turnings, copper repousse, and some Library Challenges. Check out the turnings…
Read moreAAW Total Experience: Trent Bosch on Drying Wood
This new video in the Total Experience series includes a brief AAW message and a useful woodturning tip from Trent Bosch on Drying Wood (TRT 2:22).
January 2018 Show and Tell
Andy DiPietro showed this turned and carved Eastern Red Cedar sculpture he fashioned from a 30 foot log!
Read morePollyanna Exchange Shows Off Bucks Talent
Twenty-two woodturners participated the Pollyanna Exchange this year. Given the requirement that it contain a finial we expected lots of ornaments, but we were pleasantly proved wrong!
Read moreAvelino Samuel Presents a Finial...and more
Avelino visited the Bucks Woodshop in October and presented his take on designing and making finials. It could not be more appropriate since our newly announced 2017 Pollyanna Exchange theme is "Something with a Finial."
Read more
September's Show and Tell- Hardy Response to the Bowl Challenge
Here is one of the many bowls made in response to President Matt Overton's summer challenge: Make a Bowl! Well, did we have bowls- big ones, little ones and everything in between!
Read moreLetter from Matt Overton
Now that Summer has begun to fade, it is time to think about getting back in the shop again. As we start up another year, I would like to share some of the events and plans that we (the Bucks Woodturners board) have set in motion.
Read moreAAW'S Total Experience Video
Max Brosi Demonstrates His Take on Multi-Axis Turning
Max, a 2017 Windgate ITE International Residency Fellow, stopped by the Hicks Wood Shop in June. He demonstrated how he can turn a piece on a few axes, establish a form, and then hollow, carve and sand to it create one of the pieces for which he's become so well known.
May Show and Tell: Group Goes Grande
Gil Malave put on quite a display at the Show and Tell in May. He brought an impressive and diverse collection of his recent work. Following suit, so did other members...
Read moreMini Show and Tell at April's Meeting
Take a look at some recent work by our members! HOW class work from Tom Barnes and Lise Bauman, a beautiful urn by Mike Tanner, new work by John Manura, and a platter honoring Palmer Sharpless.
Read moreBill Grumbine's Skew- in the Nick of Time
After our demonstrator couldn't make it, Bill Grumbine stepped up and stopped by the Hicks Woodshop to show us how he uses the skew chisel to turn furniture legs.
Read moreMarch Show and Tell Features Work by Joyce McCullough
The recent passing of our wonderful and talented member, Joyce McCullough, inspired Joe Seltzer to bring in some of Joyce's work from his collection.
Read moreDennis Fuge Makes Them Pop! at February Meeting
Dennis Fuge gave a great demonstration on using metals and resins to enhance turnings, especially those with defects that would otherwise consign them to the firewood pile.
Read moreJanuary 2017 Show and Tell
We had a great Show and Tell session at our January meeting. See the presenters and their work in this post!
Read moreHoliday Party and Pollyanna Exchange
Another great holiday celebration! This annual tradition of a Pollyanna Exchange and Raffle is always a big hit with our members. Here's Joyce McCullough winning the raffle-
Read moreJakob Weissflog Demonstrates at Michael Kehs' Workshop
Recent recipient of the Bob Stocksdale International Excellence in Wood Award, Jakob Weissflog paid a visit to Michael Kehs' workshop in Quakertown, PA on Tuesday November 8th.
Read moreSeptember 2016 Show and Tell
It has been a while since we've had a Show and Tell, and this was worth the wait. In addition to our members usual creativity, we were treated to work from HOW experiences, classes at Bucks, a class by Cynthia Gibson, and some really great pieces from Joe Seltzer's collection.
Speaking of creativity, Andy DiPietro started us off with the latest in his explorations in wood sculpture.
Read moreApril 2016 Show & Tell
We had a great meeting in April- a robust Show and Tell and an auction to raise money for a new projector system. Take a look at excellent work of our members.
Read moreWorkshop: Hans Weissflog Makes a Hans-Martin Box
This unique vessel is a great demonstration of Han Weissflog's ingenuity and craftsmanship.
Read more